Join Now

thanks for making such a great tutorial! it's easy to follow and very helpful. unfortunately i encountered a problem with …

Forum Archive › thanks for making such a great tutorial! it's easy to follow and very helpful. unfortunately i encountered a problem with …

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 21, 2016 at 6:49 pm #4895
    wbuilder
    Participant

      thanks for making such a great tutorial! it’s easy to follow and very helpful. unfortunately i encountered a problem with the shrinkwrap modifier. not quite sure what to do about it here is screenshot http://prntscr.com/b6vkyb

      May 22, 2016 at 9:49 am #23201
      wbuilder
      Participant

        alright i figured it out. it actually quiet simple, since the mode is set by default to nearest surface the meshes have to be inside of each other or it will only warp to the surface.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • The topic ‘thanks for making such a great tutorial! it's easy to follow and very helpful. unfortunately i encountered a problem with …’ is closed to new replies.