Backhoe Contribution – blanchsb – Interior Rear Control Columns

[Shawn Blanch]

Blanchsb Assigned

[Kent Trammell]

There he is! You probably know the drill by now but I’ve created 2 files for you:

• DOG-434E_model/MASTER_parts/WIP/BLANCHSB_dog-434e_interior_rear-control-columns_01.blend
• DOG-434E_model/MASTER_parts/BLANCHSB_dog-434e_interior_rear-control-columns_MASTER.blend

The first one is meant to be where you start your work-in-progress, saving iteratively as needed. After each modeling session, simply save over the mastered version to the MASTER_parts folder (second file listed above).

Feel free to link in other mastered parts if you need. Also I placed the interior reference collage in the DOG-434E_model/REF folder. Let me know if anything isn’t clear!

[Shawn Blanch]

Clear as mud!

Haha yeah I understand much better now. I just needed to reread it a few times. Forgive my stupidity.

[Shawn Blanch]

Wow. I thought I would be starting from scratch on these bad boys. I have a little something to work with now. Thanks @theluthier 

[Kent Trammell]

No problem! Twas my goal to give everyone a head start with a blockout. Seemed important with all the potential collisions. 

[Shawn Blanch]

Geez I say that but then life gets in the way this month lol. Had 2 car problems to fix this month and this week my work sent half the people on vacation leaving the other half to try and work (unproductively).

I’ll have my loader arms updated so there’s no line interference but I doubt I will make any progress on the rear control arms. Looks like we got someone else to take them on too though.

[Author]

Posts