A different way of doing this.

[Csüllög György]

If i think that this could be made like. collapse the cube into its origin dot. and from the origin dort. start Extrude around the front edge. bevel corners , etc. then pull the whole stuff out from a flat plane to a 3d object?

 i mean i dont have issue about this but i wonder if i do this a different way than this than its an okay thing to do or it has a proper meaning of doing it like this.

[Martin Bergwerf]

Hi Csüllög,

Yes, there are many, many ways of doing this and all are valid, as long as they get the result you want.

It’s more of a preference than suggesting that one way is better than another. The result is what counts most, not so much how you get there.

[Omar Domenech]

Yes exactly, there are a lot of ways to accomplish the same thing, though if you’re a beginner and planning to follow along with the video, maybe you should do what I do, just watch the course as if it was a movie and then you co in a second time but this time hands on and going after a good final result but now having an overview of it all.

[Csüllög György]

Thank you for the answers. ill keep copy the video as close as possible . before i try to extend my process of doing the same thing in a whole different way.

[Jezer Andino]

Hi everyone! ^___^ As some of you have recommended, I believe (by experience) that following up first is really productive, because the way the course is made, it help get the basics and fundamentals in our minds, even if the methods seems to take many steps, it is good because repetition is key for learning, so yeah, there are some ways to achieve the same results probably in simple steps, but then it wouldn’t be as instructive as the methods used in the course. 

Have a nice day!

SeeYa!

(PS: sorry if my english have errors, my original language is Spanish ^__^u)

[Author]

Posts