on Smoke Domain. i didn´t understood the last part about division and sub division and noise. i didn´t find those settings

This topic has 3 replies, 2 voices, and was last updated 9 years, 9 months ago by Jonathan Lampel.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
December 7, 2016 at 11:21 pm #5890
Uno Castillo
Participant
on Smoke Domain. i didn´t understood the last part about division and sub division and noise. i didn´t find those settings
December 8, 2016 at 10:10 am #24512
Jonathan Lampel
Participant
The divisions refer to the main resolution divisions, which is in the Smoke settings at the top. The subdivisions and noise refer to the divisions found in the Smoke High Resolution panel a bit farther down.
December 10, 2016 at 4:28 pm #24513
Uno Castillo
Participant
unfortunately i don´t see any of those controls. the settings that i found in Smoke High resolution are: Resolution, Flow sampling – Noise Method – strength.
December 12, 2016 at 11:05 am #24514
Jonathan Lampel
Participant
The High Resolution Resolution is what I mean by subdivisions, apologies for the confusion (there were just too many things called “resolution”). The Strength setting is the strength of the noise method, which is what I’m referencing in the video.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘on Smoke Domain. i didn´t understood the last part about division and sub division and noise. i didn´t find those settings’ is closed to new replies.