Hand does not Rotate with Elbow_pole.L

This topic has 1 reply, 2 voices, and was last updated 1 year, 2 months ago by Wayne Dixon.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 13, 2025 at 1:25 pm #20311
John Frey
Participant
At approximately 18.08 Minutes into the tutorial:

When you move the Elbow_pole.L up and down with G your arms DEF-Arm_Upper.L, DEF-Forearm.L and DEF-Hand.L all rotate.

When I move the Elbow_pole.L up and down with G only DEF-Arm_Upper.L and DEF-Forearm.L rotate, DEF-Hand.L doesn’t rotate.

I can’t figure out what I’m doing wrong.

Any suggestions where I went wrong?
June 13, 2025 at 5:34 pm #95459
Wayne Dixon
Participant
Hey John,
In the end you don’t want the hand to rotate when the elbow moves. So it’s possible that you have inadvertently already done something that I later do??

It’s impossible to tell without looking at your file, but I wouldn’t worry about that. Just keep going, if it’s still a problem* when the arm is complete then check it against the finished rig.
*it’s not a problem at the moment
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘Hand does not Rotate with Elbow_pole.L’ is closed to new replies.