Join Now

streaks on mesh?

Forum Archive › streaks on mesh?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 25, 2025 at 5:01 pm #19598
    Kai VDL
    Participant

      So when i was filling on the faces for the speakers in the Press start tutorial, these streaks appeared on my mesh and im not sure why. I was wondering if anyone knew why.

      -SirKaioMan.01-25 3_56_29 PM.png

      January 25, 2025 at 6:38 pm #92823
      Omar Domenech
      Participant

        Looks like overlapping faces? Try selecting it in face select mode and delete it so you can fill the gap anew. Also try the other usual suspects, merge vertices by distance, see if you have flipped normals and recalculate them with Shift + N. 

        January 26, 2025 at 2:21 am #92824
        Martin Bergwerf
        Participant

          And while you’re at it, please Apply the Scale (in Object Mode, CTRL+A > Apply  > Scale). You’re going to need to adjust the Amount in the Bevel Modifier then, because a 12mm Bevel on a less than 3mm thick model is a bit much😉

          Let us know if Omar’s suggestions worked.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • The topic ‘streaks on mesh?’ is closed to new replies.