Collab2021 – WIP – amblender

This topic has 51 replies, 7 voices, and was last updated 5 years, 4 months ago by Kent Trammell.

Viewing 15 posts - 1 through 15 (of 52 total)

1 2 3 4 →

Author

Posts
April 6, 2021 at 3:17 pm #13752
Angela
Participant
This is my thread documenting my progress in the Collab2021 project.
April 10, 2021 at 4:15 pm #65953
Angela
Participant
Still needs some cracks and blemishes, but it looks like in the picture
April 10, 2021 at 7:21 pm #65954
Angela
Participant
Homework Submission – Week 1 – Crate

@theluthier

Here is my blockout of the crate. All the pieces are there. Cracks and blemishes are still missing. I added tha last planks and redone alot of the existing planks, because i overdid it with bevel and the facecount got quite high
April 11, 2021 at 2:25 am #65955
yukino hatake
Participant
nice work , its a good blockout 🙂 with some extra details or sculpting it will increase even more
April 11, 2021 at 2:43 am #65956
onelombax
Participant
@amblender Considering the shading of the object, check if your normal are pointing in the right direction.

Check the Face Orientation box to see your object normal orientation

the red mean it is pointing in the wrong direction, blue means okay 🙂
April 11, 2021 at 7:05 am #65957
Ingmar Franz
Participant
Great work, @amblender 👍! I’m looking forward to your version with cracks and blemishes 😀!
April 11, 2021 at 7:06 am #65958
Ingmar Franz
Participant
Good tip, @onelombax 👍!
April 11, 2021 at 7:10 am #65959
Ingmar Franz
Participant
@amblender Just a quick reminder. We still need a name for our team? What’s your vote?

[Note: I know that one of the proposals is from you. It’s just for having your final vote]

1) Shabby Chic

2) All Access(ories)

3) Shabby Fresnel Chic

4) The Stan Dalones
April 11, 2021 at 7:18 am #65960
Angela
Participant
I had the same idea and started checking them this morning
April 11, 2021 at 2:11 pm #65961
Angela
Participant
Finally setup the camera and corrected the normals. Now everything is a nice blue
April 11, 2021 at 3:56 pm #65962
Angela
Participant
I started to age the crate and give him his lovely character
April 12, 2021 at 4:23 pm #65963
Kent Trammell
Participant
Excellent work for week 1 @amblender! Are you the one who had the idea to add shelves in the crate? Ingmar told me and it was a resounding YES in my modeler soul. Brilliant way to introduce function while remaining true to the art. You get full points from me this week 👍

I saw below that you’re starting to add wood grain details into the model. Maybe wait for the stream tomorrow to see how sculpting works with assets like these 🙂
April 12, 2021 at 5:21 pm #65964
Ingmar Franz
Participant
@theluthier Yes, the idea with the compartments is from @amblender here 👍!
April 13, 2021 at 3:44 pm #65965
Angela
Participant
Question: @createtaiwan and @duerer

During Kent Stream i realised i only use a few different forms of planks. And for the sculpting porsion it would be easier to only have to sculpt those few planks.

1) should i just use linking the object data between the similar planks?

2) @createtaiwan You use 4 modeled pieces to put together your fence. Is that a method i could use or something similar?
April 15, 2021 at 8:59 am #65966
Ingmar Franz
Participant
@amblender I would use the method of repeating a very small set of basic elements that Kent @theluthiers proposes here (scroll down to the orange frame) for the construction of the fence. It’s also the method that Kent applies here in his “Treasure Chest” course: Reusing duplicated planks rotated upside down or backside to the front helps to reduce the work significantly. And who can tell that you reused a plank from the crate part visible in the artwork on in a hidden place 😉?
Author

Posts