Join Now

Subdividing bottom line not preventing edge loops from going all the way down.

Forum Archive › Subdividing bottom line not preventing edge loops from going all the way down.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 14, 2025 at 11:09 pm #20747
    Shayne Lewis
    Participant

      I tried subdividing the bottom line to keep the edge loop for the slots from going all the way down, but it doesn’t work. Am I doing something wrong, or was that removed in later versions? I’m using version 4.5.1.

      Untitled.jpg

      September 15, 2025 at 3:29 am #97081
      Martin Bergwerf
      Participant

        Hi Shayne @tslewis123 ,

        Yes, you are doing something wrong.

        Most likely, you have double Vertices, so you have 2 Edges on top of each other and you Subdivided one of them, but not the other.

        Exagerated:

        CTRL+R.png

        So, Merge them (don’t forget to Select at least the 4 Vertices that need Merging!) and try again.

        September 15, 2025 at 9:03 am #97082
        Omar Domenech
        Participant

          The usual public service announcement, Press Start is not super totally beginner, it’s more of a tech demo. If you want to learn topology and all that good thing, CORE mesh Modeling is the one to go first. 

          https://cgcookie.com/p/core

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • The topic ‘Subdividing bottom line not preventing edge loops from going all the way down.’ is closed to new replies.