Join Now

At 19:11 Scaling S -> X not working for me

Forum Archive › At 19:11 Scaling S -> X not working for me

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 19, 2020 at 1:16 pm #11541
    gregkachu
    Participant

      Hi there,

      At 19:11, after the inset on the Tank thread and extruding. When i try to scale S -> X, nothing seems to happen. Scaling in any other direction works though

      Any help will be much appreciated

      March 19, 2020 at 1:35 pm #55234
      Jonathan Lampel
      Participant

        Hey Greg, since then the new default is to move or scale along the orientation set in the 3D view header, so it could be doing nothing if you have that set to something other than Global. Instead of changing it every time though, you can just hit X one more time to toggle between orientations. Hope that helps!

        March 19, 2020 at 1:50 pm #55235
        gregkachu
        Participant

          Hi Jonathan,

          Thanks for the fast response!

          By default it already says: Scale 1.0000 along global X

          Have tried hitting X one more time, but unfortunately, it is still not working.

          Anything else i can try?

          March 20, 2020 at 3:00 am #55236
          gregkachu
          Participant

            Hi Jonathan, 

            It is now working after i set the Transform Pivot to 3D cursor. I must have changed it by accident

            March 20, 2020 at 5:43 pm #55237
            Jonathan Lampel
            Participant

              Ah, good catch! Glad it worked out. 

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • The topic ‘At 19:11 Scaling S -> X not working for me’ is closed to new replies.